Beduan PU Transmission Round Belt 8mm OD High-Performance Urethane Belting Green for Conveyor Bonding Machine Dryer 10 Ft

This review is for Beduan PU Transmission Round Belt 6mm OD High-Performance Urethane Belting Green for Conveyor Bonding Machine Dryer 16.4 Ft.The length of 6mm diameter urethane belt was delivered on-time, complete and as described by the seller. One of the two drive belts on my pool-cleaner had broken. I contacted the manufacturer who had no parts available and I was unable to find a third-party equivalent, toothed, flat belt of the same dimensions. During my online search I came across this customizable round belt at a fraction of the price of products similar to that I was seeking; I ordered it thinking that it was worth a try as a temporary solution until the manufacturer’s part becomes available. The Beduan belt arrived next day and I eagerly got to work. The surface is not smooth but is textured so, even without teeth, I figured it would provide sufficient traction under tension. It is also somewhat elastic so, with a suitable belt length, some tension can be generated. I cut a test length with scissors and used the open flame from a butane torch to melt the ends before fusing together. It took a few minutes for the urethane to harden and I found it helped to hold in place by hand over a flat surface during hardening. The excess material was removed using a fine grindstone. I was impressed with strength of my test loop and proceeded to measure/cut a length for the pool cleaner, then fused/cleaned the ends and fitted it in place. The pool cleaner has just completed a 2-hour cleaning cycle and appears to be working well with this belt. I am not sure how long this fix will last; for now I am very pleased with the result.

Works great with my watchmaker lathe and new hermes engraver. Belt very easily welded together. Very strong.

easy to weld, fixed 2 drum carders perfectly, and for a fraction of the cost of pre-made bands

The surface texture of the rubber has a rough texture which supplies extra grip on the pulleys of a Singer29lk70 sewing machine. The old leather belt was worn and Burnished to much to get a grip on the pulleys w/o over torquing tension on the pulleys’s bearings. 👍👍Had to still use the metal staple to link the ends of the belt though 👎 PIA

So far I am pleased with this product, I used it to fabricate a belt for a 70 year old metal lathe. With all the belt manufactures making it difficult to know the actual belt length. This product makes it easier to get a machine running again, also saves time and effort just installing a belt.

works far better than I would have imagined I used a zippo for heat to melt it together and it was the perfect temperature. the cord out performs the belt in every way.

This stuff is incredible. If you have machinery or like to tinker forget V-belts just use this. So simple to join I use a propane torch and melt both ends then hold them tightly together til it cools then that’s it you’re done. If you don’t like the size cut it and do it over.

I got lucky when I found this. I have a number of antique player-pianos and arcade machines. One of the pianos has a belt that drives the roll, and it was just getting worn out from many years of use. It is made out of thick, round leather and I was having no success looking for a replacement. The closest thing seems to be leather belt meant for Singer sewing machines, but this is a fair amount too thin. This stuff is amazing. You just cut it to length, melt both ends with a lighter and push them together until they harden. I was Leary at first that it would hold up, but it is unbelievably strong. At first, I cut it just a little too long, but it was so easy to cut about a half an inch off and reattach it. I'm sure this will be useful for other things later. It's available in different thicknesses and also either smooth or rough. The rough style seems to be perfect for this application, so it won't slip when in use.